Water quality modeling of a prairie river-lake system

Abstract

Eutrophication of an under-ice river-lake system in Canada has been modeled using the Water Quality Analysis Simulation Program (WASP7). The model was used to assess the potential effect on water quality of increasing inter-basin transfer of water from an upstream reservoir into the Qu'Appelle River system. Although water is currently transferred, the need for increased transfer is a possibility under future water management scenarios to meet water demands in the region. Output from the model indicated that flow augmentation could decrease total ammonia and orthophosphate concentrations especially at Buffalo Pound Lake throughout the year. This is because the water being transferred has lower concentrations of these nutrients than the Qu'Appelle River system, although there is complex interplay between the more dilute chemistry, and the potential to increase loads by increasing flows. A global sensitivity analysis indicated that the model output for the lake component was more sensitive to input parameters than was the model output of the river component. Sensitive parameters included dissolved organic nitrogen mineralization rate, phytoplankton nitrogen to carbon ratio, phosphorus-to-carbon ratio, maximum phytoplankton growth rate, and phytoplankton death rate. Parameter sensitivities on output variables for the lake component were similar for both summer (open water) and winter (ice-covered), whereas those for the river component were different. The complex interplay of water quality, ice behaviors, and hydrodynamics of the chained river-lake system was all coupled in WASP7. Mean absolute error varied from 0.03–0.08 NH₄-N/L for ammonium to 0.5 to1.7 mg/L for oxygen, and 0.04–0.13 NO₃-N/L for nitrate.