Characterization of pyrolysis bio-oil derived from intermediate pyrolysis of Aegle marmelos de-oiled cake: study on performance and emission characteristics of C.I. engine fueled with Aegle marmelos pyrolysis oil-blends

Abstract

The present research focuses on the analyzing the characteristics of bio-oil derived from intermediate pyrolysis of Aegle marmelos (AM) seed cake and its suitability for C.I. engine adaptation. Owing to the high volatile matter content of 73.69%, Aegle marmelos biomass was selected as the feedstock for this research. The intermediate pyrolysis was carried out at 600 °C in a 2-kg fixed bed type pyrolysis reactor at a heating rate of 10 °C/min and the obtained bio-oil was characterized by different analytical methods. As per American Society for Testing and Materials (ASTM) standards, physicochemical properties of the bio-oil were tested and it was observed that bio-oil is a highly viscous fluid with low calorific value. Analysis of bio-oil through FT-IR and GC-MS examination confirmed the presence of phenol, esters, alkyl, and oxygenated compounds. The performance and emission testing of direct injection diesel engine were conducted with various bio-oil blends and the results were compared with baseline diesel fuel. The experimental results showed that the addition of bio-oil decreased BTE (%) while increasing the BSEC (MJ/kW-h). At the same time, increasing the bio-oil ratio with diesel decreases dangerous emissions such as carbon monoxide and oxides of nitrogen emissions in the engine exhaust. According to engine test result, it was suggested that up to 20% of AM bio-oil (F20) can be employed as engine fuel for better engine operating characteristics.